Home/ LED Lightings / Fano LED Floodlight Outdoor IP65, Driveway & Yard

An OUTLUX 150W outdoor LED floodlight mounted on a textured beige wall, casting light downward, with a blurred interior doorway in the background.

Four black outdoor LED floodlights of different wattages (30W, 50W, 70W, 150W) arranged in ascending size order on a concrete ledge, with a stone and brick wall background.

A split-view product photo of a black LED floodlight. The left panel shows a close-up of the front face with a grid of small LED chips, a white reflector, and the text 'LUX' and '70W'.

Black outdoor LED floodlight with a circular inset showing the breathing valve detail, on a neutral beige background with text reading 'Breathing Valve'.

A wall-mounted OUTELUX 70W LED floodlight shown with a hand adjusting its side bracket, with text reading '270° Adjustable Bracket' on a plain beige wall.

Black OUTLUX 150W outdoor floodlight mounted on a gray concrete wall, with rain-like streaks and text highlighting weather-resistant and impact-resistant features, plus icons for sunny, snowy, foggy, and rainy conditions.

A black OUTLUX 150W outdoor floodlight mounted on a beige wall, with a hand plugging its power cord into a wall outlet. A circular inset shows the Australian three-pin plug and exposed cable detail, with text reading 'SAA Australian plug (Approx.

Four-panel product instruction graphic for a wall-mounted LED light fixture kit. Panel 1 shows included accessories: a black light fixture, two wall plugs, screws, and washers.

A four-panel collage showing outdoor and indoor lighting solutions in use: a pergola with a table at dusk, a workshop bench illuminated by a ceiling light, a greenhouse with plants under grow lights, and a poolside lounge area lit at night.

Fano LED Floodlight Outdoor IP65, Driveway & Yard

Fano LED Floodlight Outdoor IP65, Driveway & Yard

SKU: E017EI-30W-2

$117.58

Select Power:

Product Highlights

Quantity

Back in stock alert

We'll notify you the moment this product becomes available again.

Oops, it looks like there was an error with your submission. Please try again later.

You're all set! We'll inform you once it's available again.

Free shipping AU

48H Dispatch

Wire-Free Install

Zero Electricity Bill

100% Solar Powered

Secure Checkout

Plug In. Light Up. No Fog. No Fuss. No Compromise.

LUMILEDS. Patent glass. Anti-fog breather. 270° bracket. SAA plug-in. IP65+IK06.

Key Feature

⭐ Patent Tempered Glass — 95% Light. Zero Yellowing. Forever Clear.

Most floodlights use polycarbonate (PC) covers that yellow and haze within 2 years, losing up to 30% light output. The E017EI Fano LED Floodlight uses a patented full tempered glass design with 95% light transmission. It won't yellow, won't haze, won't degrade. Your floodlight looks and performs like new after 5 years. This is the single biggest difference between the E017EI Fano LED Floodlight and every competitor in its price range.

🌬️ Anti-Fog Breather — Clear Inside. Always.

Temperature changes create condensation inside sealed lights. Fog, frost, water droplets block light and corrode electronics. The E017EI Fano LED Floodlight's built-in breather valve balances internal/external pressure and expels moisture. Result: permanently clear glass, no fog, no frost, no corrosion. No competitor at this price offers a breather.

🔧 270° No-Remove Bracket — Sparky's Favourite

Most floodlight brackets require removing screws every time you adjust the angle. The E017EI Fano LED Floodlight's 270° tilt bracket adjusts freely without tools. Wall, ceiling, pole — one bracket does all. An electrician installs it in under 60 seconds. For bulk installs (warehouses, car parks), this saves hours of labour.

🔌 SAA Plug & Play — Plug In. Light Up.

Standard SAA-certified Australian 3-pin plug with 150cm heavy-duty cable (3×1.0mm). For basic outdoor installs (carport, shed, patio), just plug into an outdoor power point. No hard-wiring needed. AC110-265V wide voltage, PF≥0.9. For permanent/commercial installs, your sparky can hard-wire as usual.

⭐ LUMILEDS + 120lm/W + 36000h

LUMILEDS 2835 SMD chips deliver 120lm/W. 20W=2400lm up to 200W=24000lm. DOB integrated driver. 3KV surge protection suits Australian grid fluctuations. 36000+ hours = 10+ years at 10h/day. Die-cast aluminium housing dissipates heat efficiently.

🛡️ IP65 + IK06 + 2-Year Warranty

IP65 fully sealed. IK06 impact resistant — forklift bumps, flying debris, hail. Black sand-textured powder coat resists corrosion and UV. 2-year warranty. 20W-200W covers garden to warehouse.

Power Selection Guide

Watt	Lumens	Coverage	Best For
30W	3600lm	~50m²	Carport, driveway, patio
50W	6000lm	~100m²	Large garden, small warehouse
70W	8400lm	~150m²	Medium warehouse, loading dock
100W	12000lm	~200m²	Large warehouse, sports court
150W	18000lm	~250m²	Car park, logistics centre

The E017EI Fano LED Floodlight uses a patented full tempered glass front with 95% light transmission. Most competitors use polycarbonate (PC) covers which yellow, haze, and lose up to 30% light output within 2 years of outdoor exposure. Tempered glass does not yellow, does not haze, and maintains crystal clarity for the life of the fixture. It is also more scratch-resistant and heat-resistant than PC. This is a genuine patent — not a marketing claim.

When outdoor lights heat up during the day and cool at night, pressure differences cause moisture to build up inside. This creates fog, frost, and water droplets on the glass — blocking light and corroding electronics. The E017EI Fano LED Floodlight has a built-in breather valve that balances internal and external air pressure while keeping water out. Result: the glass stays crystal clear in all seasons. No fog in winter. No condensation after rain. No competitor at this price point includes a breather valve.

For basic installs: no. The E017EI Fano LED Floodlight comes with a standard SAA-certified Australian 3-pin plug and 150cm heavy-duty cable. Just mount the bracket on the wall, hang the light, and plug into an outdoor power point. For permanent or commercial installations where hard-wiring is preferred, your electrician can wire it directly — the 270° no-remove bracket makes their job much faster (most sparkies do it in under 60 seconds per light).

The bracket stays fixed to the wall — you never need to remove it. The floodlight body tilts freely within a 270° arc. Want to angle it down for a driveway? Just tilt it. Want to angle it up to wash a façade? Just tilt it. No screwdriver, no loosening bolts. This is why electricians prefer the E017EI Fano LED Floodlight for bulk commercial installs — one bracket, all angles, zero fuss.

30W (3600lm): carport, residential driveway, patio. 50W (6000lm): large garden, small warehouse, shop front. 70W (8400lm): medium warehouse, loading dock. 100W (12000lm): large warehouse, sports court. 150W (18000lm): car park, logistics centre. 200W (24000lm): stadium, large commercial facility. All models share the same patent glass, breather, 270° bracket, and SAA plug. When in doubt, go one size up — you can't have too much light in a warehouse.

IP65 rated: fully sealed against dust and water jets from any direction. IK06 impact rated: resists external impacts equivalent to a 500g weight dropped from 20cm. Die-cast aluminium housing with UV-resistant black sand-textured powder coat. The breather valve maintains the IP65 seal while preventing internal condensation. 3KV surge protection handles Australian grid voltage spikes. Tested for year-round outdoor use in all Australian climates.

2-year warranty backed by OUTWAY Australia.

LUMILEDS chips are rated for 36,000+ hours (over 10 years at 10 hours/day).

For trade and bulk enquiries (10+ units), contact sales@outway.com.au or call 0481 206 533 for exclusive pricing.